Quote scope, not a catalog price

Digital multimeter BM789 price requests need an exact configuration

Buyers who type digital multimeter BM789 price are usually trying to compare one handheld family. LinkScope Sourcing 51 treats BM789 as the buyer’s requested model string. Factories must answer with the exact manufacturer, revision, and included accessories. A matching nickname is not proof of the same measurement accuracy.

  1. Model string and manufacturer as printed on the datasheet
  2. Count resolution and the ranges that must be priced
  3. Safety category and probe set
  4. Calibration evidence and what is excluded
Printed RFQ sheet beside a handheld meter and probe pouch

Evidence ledger for a BM789-style comparison

Each row below is a document or statement to request. None of these rows is a credential of this sourcing desk. Supplier ISO 9001, FCC equipment authorization, or an NRTL mark applies when the proposed item’s file shows it, and many handheld meters are outside FCC radio authorization entirely.

LineAsk the factory to stateBuyer check
IdentityManufacturer, model, and datasheet revisionReject a family photo with no model
AccuracyMeasurement accuracy with range, percent, and digitsDo not average unlike ranges
ImpedanceInput impedance on the voltage range in the procedureNote if a low-impedance mode is extra
FrequencyFrequency range for AC or Hz measurement1 kHz and 100 kHz are different claims
SafetyIEC 61010-1 category, such as CAT III 600 VMatch the installation, not the advertisement
CalibrationCalibration traceability, interval, and serial link12 month certificates are a choice, not a default
EnvironmentIngress protection and operating temperatureIP40 and IP67 change the enclosure quote
AccessoriesProbes, case, fuses, and connector mating cycle notesPrice the pouch separately if it is optional

Scenario: model-string shortlist

Background: a maintenance contractor searched digital multimeter BM789 price for 25 units destined for Arizona. Process: the brief required the BM789 string or a named deviation, DC accuracy written as percent plus digits, CAT III 600 V or the category on the datasheet, a 10 A fused jack, and probes included. Result: one offer used a different count resolution and excluded leads, so it stayed on the deviation page until the buyer decided whether the procedure allowed that substitute.

Scenario: software and license split

Background: a data-hall owner wanted logged voltage checks, not just a display. Process: the RFQ separated the meter, the interface cable, and any logging license, and asked whether frequency range and impedance specs change when logging is active. Result: the comparison showed a meter price and a software price instead of one blended figure that hid a missing license.

Compatibility questions that a model nickname does not close

Does “BM789” fix the manufacturer?

No. The buyer should require the responding factory to name the maker and model it will ship. A compatible housing can share a search phrase and still differ in measurement accuracy, fuse arrangement, or safety category.

Can a handheld replace an RF or fiber test set?

It cannot. Return loss, VSWR, optical budget, and receiver sensitivity belong to other instruments. Keep those lines off the multimeter quote so the price stays about voltage, current, and resistance.

What if the host procedure specifies a brand lead set?

Write the lead requirement as mandatory or acceptable-deviation. Connector mating cycle life and insulation rating are part of that line. A lower meter price with unrated leads is a different product.

How are high-end and budget preferences used?

A buyer may prefer a high-end instrument with tighter accuracy and a longer stated calibration file, a mid-range unit, a budget unit, or an undecided comparison. That preference is not a rating this desk has verified, and it does not require an existing quote.

Trade-off: new meter versus refurbished meter

A new unit can make the calibration date and the probe condition easier to describe. A refurbished unit can answer a discontinued procedure when the seller states remaining warranty months, fuse condition, and whether leads are original. The two offers are not the same commercial scope until those lines match.

Put the BM789 price lines in the requirement box

There is no file upload on this form. Paste the model string, quantity, destination, and exclusions in the procurement requirements field. Drawings or prior quotes can be sent after the desk replies to the work email you provide.